Characteristic | Value |
---|---|
Lifting capacity | 24 t |
Static load | 50 t |
Lift per turn of handle |
|
- Low gear | 0,9 mm |
- High gear | 15,0 mm |
Crank force per crank at 16 t lifiting capacity | 210 N |
Note: The drift for the S and A feet is ±140 mm.
Dimensions A, B, C and E, see General information.
* no bracing bracket are supplied for the combination of mounting heights 04, 05, 06, 24 with back plate 02, 03.See accessories for loose bracing bracket.
** can be used without restriction on Modul legs produced after week 22/02. On Modul legs produced before that the angle ofmovement is reduced by ± 10°.
Note: Landing gear with foot “R” (Wheels) please refer to MODUL CW
The module components U (crank with crank parking hook) and L (connection shaft) must be ordered separately and are available individually. The type of feet D are likewise available separately.
The complete order number to order the Modul is made up of the order numbers of the various components. First choose the individual components. Each component has a 2-figure order number. List all the components (in other words all the order numbers) in sequence.
Item | Description | Remark | Order No. | per set |
---|---|---|---|---|
1 | Cover with bolts |
| JS E0046100 | 2 |
3 | see individual components |
|
| - |
4 | Bevel gear with bolt | from 020719/0126097 | JS E0058600 | 2 |
5 | Shaft |
| JS E0001500 | 1 |
6 | Bearing | compl. | JS E0046200 | 1 |
7 | Bearing |
| JS E0001800 | 1 |
8 | Shaft with bearing | a | JS E0058700 | 1 |
9 | Grease tank | a | JS E0002000 | 1 |
10 | Gear | a | JS E0055800 | 1 |
11 | Crank shaft | compl. | JS E0046500 | 1 |
12 | Bearing holder | compl., a | JS E0058800 | 1 |
13 | Crank shaft and Bearing holder | compl. with 11 + 12, a | JS E0056600 | 1 |
14 | Drive | compl. with 08, 10 + 13, a, c | JS E0083700 | 1 |
15 | Bolts, washers, nuts |
| JS E0043100 | 1 |
16 | see individual components |
|
| - |
17 | Crank bushing |
| JS E0042700 | 1 |
18 | Crank parking hook | for crank 350 mm (JS U01), b | JS E0040200 | 1 |
18 | Crank parking hook | for crank 415-480 mm (JS U02-JS U04), b | JS E0040201 | 1 |
18 | Crank parking hook | for crank 520-620 mm(JS U05-JS U08), b | JS E0040202 | 1 |
19 | Mh-04/750 shaft left | Double plate | JS E0030803 | 1 |
19 | Mh-03/800 shaft left | Double plate | JS E0030802 | 1 |
19 | Mh-02/850 shaft left | Double plate | JS E0030801 | 1 |
19 | Mh-01/900 shaft left | Double plate | JS E0030800 | 1 |
19 | Mh-06/650 shaft left | Plate A, bottom | JS E0031305 | 1 |
19 | Mh-05/700 shaft left | Plate A, bottom | JS E0031304 | 1 |
19 | Mh-04/750 shaft left | Plate A, bottom | JS E0031303 | 1 |
19 | Mh-03/800 shaft left | Plate A, bottom | JS E0031302 | 1 |
19 | Mh-02/850 shaft left | Plate A, bottom | JS E0031301 | 1 |
19 | Mh-01/900 shaft left | Plate A, bottom | JS E0031300 | 1 |
19 | Mh-05/700 shaft left | Double plate | JS E0030804 | 1 |
19 | Mh-06/650 shaft left | Double plate | JS E0030805 | 1 |
19 | Mh-06/650 shaft left | Plate A, top | JS E0031805 | 1 |
19 | Mh-05/700 shaft left | Plate A, top | JS E0031804 | 1 |
19 | Mh-04/750 shaft left | Plate A, top | JS E0031803 | 1 |
19 | Mh-03/800 shaft left | Plate A, top | JS E0031802 | 1 |
19 | Mh-02/850 shaft left | Plate A, top | JS E0031801 | 1 |
19 | Mh-01/900 shaft left | A-Platte oben | JS E0031800 | 1 |
20 | Mh-06/650 shaft right | Plate A, bottom | JS E0029705 | 1 |
20 | Mh-01/900 shaft right | Plate A, top | JS E0028600 | 1 |
20 | Mh-05/700 shaft right | Plate A, bottom | JS E0029704 | 1 |
20 | Mh-04/750 shaft right | Plate A, bottom | JS E0029703 | 1 |
20 | Mh-03/800 shaft right | Plate A, bottom | JS E0029702 | 1 |
20 | Mh-02/850 shaft right | Plate A, bottom | JS E0029701 | 1 |
20 | Mh-01/900 shaft right | Plate A, bottom | JS E0029700 | 1 |
20 | Mh-06/650 shaft right | Plate A, top | JS E0028605 | 1 |
20 | Mh-05/700 shaft right | Plate A, top | JS E0028604 | 1 |
20 | Mh-04/750 shaft right | Plate A, top | JS E0028603 | 1 |
20 | Mh-03/800 shaft right | Plate A, top | JS E0028602 | 1 |
20 | Mh-02/850 shaft right | Plate A, top | JS E0028601 | 1 |
20 | Mh-01/900 shaft right | Double plate | JS E0029200 | 1 |
20 | Mh-06/650 shaft right | Double plate | JS E0029205 | 1 |
20 | Mh-05/700 shaft right | Double plate | JS E0029204 | 1 |
20 | Mh-04/750 shaft right | Double plate | JS E0029203 | 1 |
20 | Mh-03/800 shaft right | Double plate | JS E0029202 | 1 |
20 | Mh-02/850 shaft right | Double plate | JS E0029201 | 1 |
21 | Axial bearing |
| JS E0066401 | 2 |
22 | Mh-05/700 inner tube l. + spindle | with 21 + 04 | JS E0056405 | 1 |
22 | Mh-04/750 inner tube l. + spindle | with 21 + 04 | JS E0056404 | 1 |
22 | Mh-03/800 inner tube l. + spindle | with 21 + 04 | JS E0056403 | 1 |
22 | Mh-02/850 inner tube l. + spindle | with 21 + 04 | JS E0056402 | 1 |
22 | Mh-01/900 inner tube l. + spindle | with 21 + 04 | JS E0056401 | 1 |
22 | Mh-06/650 inner tube l. + spindle | with 21 + 04 | JS E0056406 | 1 |
23 | Mh-01/900 inner tube r. + spindle and bearing | with 21, 07 + 04 | JS E0056201 | 1 |
23 | Mh-02/850 inner tube r. + spindle and bearing | with 21, 07 + 04 | JS E0056202 | 1 |
23 | Mh-06/650 inner tube r. + spindle and bearing | with 21, 07 + 04 | JS E0056206 | 1 |
23 | Mh-05/700 inner tube r. + spindle and bearing | with 21, 07 + 04 | JS E0056205 | 1 |
23 | Mh-04/750 inner tube r. + spindle and bearing | with 21, 07 + 04 | JS E0056204 | 1 |
23 | Mh-03/800 inner tube r. + spindle and bearing | with 21, 07 + 04 | JS E0056203 | 1 |
24 | Nut and bolt*** |
| JS E1043300 | 2 |
25 | Bolt |
| JS E0055300 | 4 |
26 | Spring |
| JS E0012900 | 4 |
27 | S-Foot | compl. with 24 + 26**** | JS D01 | 2 |
28 | A-Foot | compl. with 24**** | JS D02 | 2 |
29 | T-Foot | compl. with 24**** | JS D04 | 2 |
30 | TC-Foot* | compl. with 24*+**** | JS D06 | 2 |
31 | R foot** | compl. with 24, 32 + 33* | JS D03 | 2 |
32 | Wheels with split pins Standard |
| JS E0062200 | 2 |
33 | Wheel holder** |
| JS E0067300 | 2 |
34 | Clamp with angle | with 35, 36, 37 | JS E010.010 | 2 |
35 | Angle |
| JS E010.001 | 2 |
36 | Clamp |
| JS E010.002 | 2 |
37 | Nut and bolt |
| JS E020.004 | 2 |
a from 020121/0009246
b Crank kit see General Information
c also module 2000 (replacement for JS E0059200)
* With the 06/TC foot version, item 30, the installation height Mh is reduced by 50 mm
* With the 03/roller foot version, item 31, the installation height Mh is increased by 43 mm
** 31, 32, 33: only for landing gears up to September 2009 (up to 091009 131204)
*** Nut and bolt up to September 2009 Order No. JS E1043300 (4 per Kit)
*** Nut and bolt from September 2009 Order No. JS E1043300 (2 per Kit)
**** Only one fitting included in scope of delivery
***** Replaces version with washer
Note on the new foot mounting
Since September 2009, module B has a new foot mounting which is only screwed on one side. On NO account must the wheel holder be attached with this execution of leg!
Item | Description | Remark | Order No. | per set |
3 | Connection shaft 1340 mm |
| JS L01 | 1 |
3 | Connection shaft 1450 mm |
| JS L02 | 1 |
3 | Connection shaft 1470 mm |
| JS L03 | 1 |
3 | Connection shaft 1500 mm |
| JS L04 | 1 |
3 | Connection shaft 1505 mm |
| JS L05 | 1 |
3 | Connection shaft 1575 mm |
| JS L06 | 1 |
3 | Connection shaft 1605 mm |
| JS L07 | 1 |
3 | Connection shaft 1635 mm |
| JS L08 | 1 |
3 | Connection shaft 1700 mm |
| JS L09 | 1 |
3 | Connection shaft 1790 mm |
| JS L10 | 1 |
16 | Crank 350 mm w. parking hook | with 15, 17 + 18 | JS U01 | 1 |
16 | Crank 415 mm w. parking hook | with 15, 17 + 18 | JS U02 | 1 |
16 | Crank 450 mm w. parking hook | with 15, 17 + 18 | JS U03 | 1 |
16 | Crank 480 mm w. parking hook | with 15, 17 + 18 | JS U04 | 1 |
16 | Crank 520 mm w. parking hook | with 15, 17 + 18 | JS U05 | 1 |
16 | Crank 570 mm w. parking hook | with 15, 17 + 18 | JS U07 | 1 |
16 | Crank 620 mm w. parking hook | with 15, 17 + 18 | JS U08 | 1 |